Index
Proxxon
12v Handheld Tools
Order
Site Map
|
Contact
Security
|
Comments
Proxxon 12 volt handheld tools are particularly suited to the smaller, precision jobs. They must be used with a
transformer
- included in the
complete set
and
model building and engraving set
.
Of particular note are the
drill grinder
,
pen sander
and
complete engraving kit.
See also:
230 volt hand held tools.
Proxxon 28510 Mill/Drill Unit Micromot 50/E
1001 uses: milling, drilling, routing, de-scaling, polishing, cutting, cleaning, sawing, engraving etc.
The body diameter of only 35 mm makes it easy to handle. The weight of 230g, quiet and effortless drive are due to the special motor. The ground spindle and collar bearing all contribute to the ergonomic design. The high quality steel collets ensure accurate clamping of the cutters. The size of the machine dictates a 12 V drive system, use of a transformer is required.
Variable speed 5,000 to 20,000rpm. Includes six Micromot collets.
1. The MICROMOT standard 20mm collar allows use in the
drill stand.
2. Stable housing of fibreglass reinforced POLYAMIDE. With soft gripping area for extended use.
Ideal for use with speciality
tool sets
for glass working, jewellery, electronics and modellers.
Price:
£23.64
(inc VAT at 17.5%)
Quantity:
add mains adaptor for £13.41
Proxxon 28512 Mill/Drill Unit Micromot 50/EF
The same 12 Volt tool as above but fitted with a quick action multichuck for bits with a shank size between 0.3 - 3.2mm.
Variable speed: 5,000 - 20,000rpm
Length: 220mm
Weight: 230g
Transformer required.
Price:
£23.64
(inc VAT at 17.5%)
Quantity:
add mains adaptor for £13.41
Proxxon 28534 Jig Saw STS 12/E
Enables easy curved and intricate sawing of wood (max. 10mm), printed circuit cards (max. 3mm) and non-ferrous metal (max 2.5mm).
Powerful 5 pole motor operates off 12-18V DC with power consumption up to 100w.
Stroke: 6mm.
Speed: variable 2000-5000 per minute.
Includes 1 x fine and 1 x coarse blade.
Extra blades are here.
Price:
£33.24
(inc VAT at 17.5%)
Quantity:
add mains adaptor for £13.41
Proxxon 28542 Orbital Sander SL12/E
Allows shaping, rough and fine sanding of flat surfaces and sides. Flat sanding of primers and finish polishing.
Easy to use paper clamp allows use of any sand paper. Sanding area: 80x58mm has no overhanging parts, allowing sanding into corners.
Can be used for wet sanding.
Stroke speed: 1000 - 500 per minute.
Price:
£33.24
(inc VAT at 17.5%)
Quantity:
add mains adaptor for £13.41
Proxxon 28594 Pen Sander PS12
The superfine sander with linear sanding motion (as opposed to rotary or orbital) operates at 8,000 strokes per minute with a 2.5 mm stroke.
Stable housing of fibreglass reinforced POLYAMIDE. It is ideal for surfaces, slots and tight corners. Four sanding arbors of different shapes as well as 3 sheets of pre-profiled self-adhesive sanding pads are included. The sheets are of grits 180, 240 and 400 with 5 of each shape per sheet.
Note:
A mains adapter of at least 12 - 18 V DC is required. We recommend MICROMOT power supplies NG 2/E or NG 5/E. The electronic speed control on these units allows the selection of different speeds for different applications and materials.
Extra pads can be ordered separately here.
Price:
£23.64
(inc VAT at 17.5%)
Quantity:
add mains adaptor for £13.41
add sanding pads (180 grit) for £3.57
add sanding pads (240 grit) for £3.57
add sanding pads (400 grit) for £3.57
Proxxon 28635 Complete Engraving Kit
Kit includes:
Engraving Tool GG12
Mains Adaptor
2 x diamond grinding bits (1.0 and 1.8mm)
2 x silicon carbide grinding bits
2 x carborundum grinding bits
Trial glass
Instruction book & motifs
Supplied in a plastic case.
Price:
£27.77
(inc VAT at 17.5%)
Quantity:
Proxxon 28592 Engraving Tool GG12
Tool only - see above.
12 Volt
Length 145mm
Weight 50 gr
Includes 1 diamond bit (spherical head 1.8mm).
Price:
£11.75
(inc VAT at 17.5%)
Quantity:
add mains adaptor for £13.41
Proxxon 28462 Micromot Precison Drill Grinder FBS12/E
Ideal precision tool for delicate jobs that aren't possible with a normal drill: e.g. precision drilling, milling, sanding, polishing, brushing, de-rusting, engraving and cutting.
1. Standard 20mm Micromot standard collar.
2. Ventilated motor for extended periods of use.
3. High quality 5 pole motor.
4. Electronic speed control of 3,000 - 15,000rpm.
Includes keyless chuck (capacity 0.5 - 3.2mm). A precision ball bearing minimises spindle side play. Spindle lock button for bit changing obviates the need for spanners.
Price:
£28.96
(inc VAT at 17.5%)
Quantity:
add mains adaptor for £13.41
Proxxon 28690 Micro Screwdriver MIS1
Forget about compressed air! Easy and quiet screw driving with pre selectable torques of 0.35-2.0Nm.
Complete with 16 inserts of Chrome Molybdenum steel.
The clutch is adjustable in 5 steps from 0.35 to 1.0Nm. This means tightening torques can be selected precisely. The sixth stage bypasses the clutch and yields approx. 2Nm.
* An ideally positioned rocker switch provides on/off/reverse.
* ROEHM chuck for all bit shanks up to 6.5mm.
Great tool for thread cutting. Packed in cardbord box.
Price:
£46.81
(inc VAT at 17.5%)
Quantity:
add mains adaptor for £13.41
Proxxon 28140 Soldering Iron EL12
Ideal for working on electronic components.
Heating time approx 10 seconds, easily accessible on/off switch.
Exact tip temperature of 310 degrees celcius preventing damage to transistors and ICs.
Integral light for illuminating work area.
Price:
£8.65
(inc VAT at 17.5%)
Quantity:
add mains adaptor for £13.41
Proxxon 28141 Soldering Tip
Extra/replacement tip for 28140 soldering iron EL12.
Price:
£4.96
(inc VAT at 17.5%)
Quantity:
Proxxon 28704 Micromot Mains Adaptor NG5/E
In compact NORYL casing (recommended for transformers).
With superior capacity of 5A at 16V no load and 12 Volt under load = 60VA (DC). Primary supply 220/240V. Thyristor electronic control (with feedback) for optimum tool speed and high torque at low speeds. Three polarised sockets for MICROMOT machines. A pair of sockets for standard banana plugs (4mm diameter) is also supplied.
Master switch for turning off the transformer without needing to unplug. Red LED indicates "ready". PTC protection against overload (plugged in machine will not restart automatically. After cooling down, the mains plug should briefly be unplugged to reset the adapter). Practical design with storage holes for tools with 2.35mm and 3mm shafts.
Foldable tool rest - keeps the MICROMOT tool being used safely on standby.
Price:
£35.70
(inc VAT at 17.5%)
Quantity:
Proxxon 28706 Micromot Mains Adapter NG2/S
MICROMOT mains adapter NG 2/S WITHOUT speed control.
Suitable for 12volt tools.
Price:
£13.41
(inc VAT at 17.5%)
Quantity:
Proxxon 28707 Micromot Mains Adapter NG2/E
MICROMOT mains adapter NG 2/E WITH electronic speed control.
Very compact design. NORYL casing (heat resistant - a necessity for transformer enclosures). Red LED indicates readiness for use. PTC (Positive-Temperature-Coefficient) element prevents overload (and plugged-in tool will not restart automatically). Practical design with holes for storing bits. Foldable tool rest provides a secure place for keeping the MICROMOT tool on standby. Thyristor electronic speed control (with feedback) for adjusting bit speed to suit the job, as well as providing high torque at low speeds.
(tool not included)
Price:
£17.06
(inc VAT at 17.5%)
Quantity:
Order
Index
Proxxon
12v Handheld Tools
Index Proxxon 12v Handheld Tools
