TORMEK WM-200 AngleMaster

Measures the existing bevel angle of the tool.

Set the jig to the desired sharpening angle before sharpening.

Easy to use.

Works on grinding wheels from 150 mm (5 7/8") to 250 mm (9 7/8") in diameter.

Works with the Tormek T-8, Tormek T-4 and older models.

The sharpening angle can be set from 10° to 75° with the WM-200 AngleMaster. The AngleMaster is designed to work on all grinding wheels with a diameter from 150 mm (5 7/8") to 250 mm (9 7/8"). So you get an accurate setting even if you have a grindstone that's been worn down a lot.