Screen flashes, or lights red, to alert the presence of live AC in Stud, DeepScan™, and Metal Scan modes.
A 4-mode switch makes it easy to change modes, while the ultra-bright display screen, patented SpotLite™ Pointer, and audio tone all indicate the location of the target.
StudScan mode locates the centre, edges, and direction of wood or metal studs up to 19 mm deep
DeepScan™ mode doubles the scanning depth to 38 mm deep
WireWarning™ Detection indicates the presence of live, unshielded AC electrical wiring up to 50 mm deep
Metal Scan mode locates non-ferrous metal, such as copper pipe, up to 38 mm deep, and ferrous metal, such as rebar, up to 75 mm deep
AC Scan mode locates live, unshielded AC electrical wiring up to 50 mm deep
ACT™ (Auto Correcting Technology) automatically corrects common errors, such as when scanning begins over a stud
ColorTrip™ display indicates the direction and edge of the stud and illuminates when the centre of the stud is detected
Low Battery Indicator for optimum performance
Signal Strength Indicator helps to distinguish between shallow and deep targets
SpotLite™ Pointer shines an arrow-shaped light on the wall to clearly indicate the centre of the stud
“V” marker groove for more accurate marking of target location
Rubber handle for non-slip grip
Battery (9V) Not included
