The Makita DHR242Z is able to drill in concrete as fast or faster than 24V Cordless Combination Hammer model BHR200.
One touch slide chuck for SDS-plus bit.
Easy-to-grip handle ergonomically designed to: • give maximum power thrust. • provide a sure and comfortable grip in any operation; overhead application, drilling with palm-up or palm-down grip.
3 mode operation • Rotation + Hammering • Hammering only • Rotation only
The tool body is seperated into the upper and lower housings at the foot of handle portion where the houses are jointed with vibration absorbing cushion rubbers.
Higher productivity than model BHR202 achieved by using efficient Brushless DC motor to reduce energy loss by 30%
Unique rubber joint construction suppresses the transmission of vibration to battery terminals, minimizing battery failures such as terminal breakage or poor electrical contact.
Makita DHR242Z Specifications:
Optimum Drilling Diameter Range in Concrete: 6 - 12 mm
Max. Drilling Diameter in Concrete: 24 mm
Max. Drilling Diameter in Wood: 27 mm
Max. Drilling Diameter in Steel: 13 mm
Nominal Battery Voltage: 18 V (Battery not Included)
Voltage LXT
Impact Energy: 2.0 J
Impacts per Minute (IPM): 0 - 4700 min⁻¹
No load speed: 0 - 950 min⁻¹
Sound Power Level (LWA): 101 dB(A)
Sound Pressure Level (LpA): 90 dB(A)
Noise Uncertainty (K Factor): 3 dB(A)
Vibration Level (3 axes), Impact Drilling: 15.1 m/s²
Vibration: Chiselling: 11.4 m/s²
Vibration Uncertainty (K Factor): 1.5 m/s²
Product Dimensions (L x W x H):328 x 85 x 213 mm
Drilling diameter with TCT core bit: 54 mm
Adapted for SDS-PLUS bits
Tool weight with battery: 3.4 – 3.8 kg
Battery Chemistry (Ni-Cd / Ni-MH / Li-ion): Li-ion
Electronic brake
